Conferma LVM installazione Ubuntu incustodita

4

Sto lavorando per ottenere un'installazione iso di installazione automatica per l'implementazione dell'LTS di Ubuntu (12.04.3) e avere tutto nel modo in cui lo voglio, tranne che mi sta ancora chiedendo di confermare le modifiche a LVM. Tutte le mie installazioni sono su nuove VM, quindi non c'è nulla sulle unità da sovrascrivere.

Questa è la sezione del mio file preconfigurato per il partizionamento:

## Partitioning example
# If the system has free space you can choose to only partition that space.
# This is only honoured if partman-auto/method (below) is not set.
# Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
#d-i partman-auto/init_automatically_partition select biggest_free

# Alternatively, you may specify a disk to partition. If the system has only
# one disk the installer will default to using that, but otherwise the device
# name must be given in traditional, non-devfs format (so e.g. /dev/hda or
# /dev/sda, and not e.g. /dev/discs/disc0/disc).
# For example, to use the first SCSI/SATA hard disk:
#d-i partman-auto/disk string /dev/sda
# In addition, you'll need to specify the method to use.
# The presently available methods are:
# - regular: use the usual partition types for your architecture
# - lvm:     use LVM to partition the disk
# - crypto:  use LVM within an encrypted partition
d-i partman-auto/method string lvm

# If one of the disks that are going to be automatically partitioned
# contains an old LVM configuration, the user will normally receive a
# warning. This can be preseeded away...
d-i partman-lvm/device_remove_lvm boolean true
# The same applies to pre-existing software RAID array:
d-i partman-md/device_remove_md boolean true
# And the same goes for the confirmation to write the lvm partitions.
d-i partman-lvm/confirm boolean true
d-i partman-lvm/confirm_nooverwrite boolean true

# For LVM partitioning, you can select how much of the volume group to use
# for logical volumes.
d-i partman-auto-lvm/guided_size string max
#d-i partman-auto-lvm/guided_size string 10GB
#d-i partman-auto-lvm/guided_size string 50%

# You can choose one of the three predefined partitioning recipes:
# - atomic: all files in one partition
# - home:   separate /home partition
# - multi:  separate /home, /usr, /var, and /tmp partitions
d-i partman-auto/choose_recipe select atomic

# Or provide a recipe of your own...
# If you have a way to get a recipe file into the d-i environment, you can
# just point at it.
#d-i partman-auto/expert_recipe_file string /hd-media/recipe

# If not, you can put an entire recipe into the preconfiguration file in one
# (logical) line. This example creates a small /boot partition, suitable
# swap, and uses the rest of the space for the root partition:
#d-i partman-auto/expert_recipe string                         \
#      boot-root ::                                            \
#              40 50 100 ext3                                  \
#                      $primary{ } $bootable{ }                \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ /boot }                     \
#              .                                               \
#              500 10000 1000000000 ext3                       \
#                      method{ format } format{ }              \
#                      use_filesystem{ } filesystem{ ext3 }    \
#                      mountpoint{ / }                         \
#              .                                               \
#              64 512 300% linux-swap                          \
#                      method{ swap } format{ }                \
#              .

# If you just want to change the default filesystem from ext3 to something
# else, you can do that without providing a full recipe.
#d-i partman/default_filesystem string ext4

# This makes partman automatically partition without confirmation.
d-i partman-md/confirm boolean true
d-i partman-partitioning/confirm_write_new_label boolean true
d-i partman/choose_partition select finish
d-i partman/confirm boolean true
d-i partman/confirm_nooverwrite boolean true

## Controlling how partitions are mounted
# The default is to mount by UUID, but you can also choose "traditional" to
# use traditional device names, or "label" to try filesystem labels before
# falling back to UUIDs.
#d-i partman/mount_style select uuid

Puoi trovare il mio intero file preconfigurato qui: link se pensi che il problema si trovi al di fuori di questa sezione

La ricerca:

posta Rockstar04 15.11.2013 - 23:06

1 risposta

1

Ecco tutte le voci di conferma che ho nel mio preseed (che usa LVM):

d-i partman/confirm_write_new_label     boolean true
d-i partman/choose_partition            select  finish
d-i partman/confirm_nooverwrite         boolean true
d-i partman/confirm                     boolean true
d-i partman-auto/purge_lvm_from_device  boolean true
d-i partman-lvm/device_remove_lvm       boolean true
d-i partman-lvm/confirm                 boolean true
d-i partman-lvm/confirm_nooverwrite     boolean true
d-i partman-auto-lvm/no_boot            boolean true
d-i partman-md/device_remove_md         boolean true
d-i partman-md/confirm                  boolean true
d-i partman-md/confirm_nooverwrite      boolean true

Questo dovrebbe essere più di ciò che è necessario per confermare tutte le finestre di dialogo del partizionamento.

Dall'aspetto di ciò che hai, potresti perdere le d-i partman-md/confirm_nooverwrite boolean true o le d-i partman-md/confirm_nooverwrite boolean true voci (o entrambe). Non potrei dire nel tuo caso senza che tu ci provi.

    
risposta data Dave 23.03.2014 - 01:43

Leggi altre domande sui tag